Emergency shutdown valve for liquefied petroleum gas

Emergency shutdown valve for liquefied petroleum gas
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

Liquefied petroleum gas emergency shutoff valve has excellent technical performance, low load loss and high reliability, installed in liquefied petroleum gas, natural gas and gas pipeline, with long-distance gas source matching use, use of gas source control valve open-close, in order to occur on the pipeline or tank leakage or even fire, quick manual gas source When the pressure is relieved, or the temperature is higher than 75%% p5C%% D, the fusible alloy melts easily, and the cylinder automatically relieves pressure, and the emergency shutoff valve closes quickly for less than 5 seconds to stop leakage, thus playing a safe and protective role. Widely used in gas supply network system, gas heat plant workshop, gas boiler room and residential safety facilities.


Characteristic


Liquefied petroleum gas emergency shutoff valve is a new type of actuator valve in automation system. It is composed of multi-spring pneumatic membrane actuator or floating piston actuator and control valve. It receives the signal of regulating instrument and controls the shut-off, switch-on or switch-over of fluid in process pipeline. The product has the characteristics of simple structure, sensitive reaction and reliable action. It can be widely used in petroleum, chemical, metallurgical and other industrial production departments. The air source of the pneumatic shutoff valve requires filtered compressed air or nitrogen, and the medium flowing through the valve body should be impurity-free and granular liquid and gas.


Working principle


1. A two-position three-way solenoid valve is installed at the inlet of LPG emergency shutoff valve. The valve can be controlled by remote electrical console.


2. the gas leakage alarm alarm is electrified, the solenoid valve is electrified and the exhaust valve is automatically closed.


3. manual control solenoid valve (press the red card) exhaust, the valve automatically closes.


Performance specification


Pressure level: 1.6/4.0Mpa


Cylinder working pressure: less than 2.0Mpa


Service temperature: -40~ 80 C


Cylinder medium: nitrogen, anhydrous air


Use medium: natural gas, liquefied petroleum gas, liquid ammonia


Melting time: + 70 C


Closing time: less than 5 seconds.


Cylinder opening pressure: greater than or equal to 0.3-0.6Mpa


Valve body: cast rigid, stainless steel. 304316316L


Spring: 50CrVA (spring steel)


Cylinder, piston: ductile iron


Sealing ring, O ring: polytetrafluoroethylene, butadiene rubber


Type: normally open, normally closed.


Main shape connection dimensions


DN-JIS
L
MAX流量:升/分Max.FIoW/min
mm
in
25
1"
160
160
32
1-1/4"
200
400
40
1-1/2"
200
400
50
2"
240
640
80
3"
283
1600
100
4"
305
2500
150
6"
403
3300
200
8"
502
5900


注:采用止回閥原理,只能單想截斷,安裝時必須注意閥門標志,將要保護的一端作為閥門入口,閥門安裝方向為高進低出.

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.Emergency shutdown valve for liquefied petroleum gasPlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!