YK43X natural gas pressure reducing valve

YK43X natural gas pressure reducing valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

YK43X natural gas pressure relief valve is a pilot piston pressure relief valve. It is composed of main valve and pilot valve. The main valve is mainly composed of valve seat, main valve disc, piston, cylinder liner, spring and other parts. The pilot valve is mainly composed of valve seat, disc, diaphragm, spring, adjusting spring and other parts. By adjusting the spring pressure and setting the outlet pressure, the diaphragm is used to sense the change of the outlet pressure, and the piston is driven by the pilot valve to adjust the throttle area of the main valve to realize the function of reducing pressure and stabilizing pressure.

YK43X natural gas pressure relief valve is mainly used for natural gas pipeline, but also for air, nitrogen, oxygen, hydrogen, liquefied gas and other gases.

Main technical parameters


公稱壓力(MPa)
1.6
2.5
殼體試驗壓力(MPa)
2.4
3.75
密封試驗壓力(MPa)
1.6
2.5
z高進口壓力(MPa)
1.6
2.5
出口壓力范圍(MPa)
0.1-1.0
0.1-1.6
壓力特性偏差(MPa)
GB12246-1989
流量特性偏差(MPa)
GB12246-1989
z小壓差(MPa)
0.15
0.15
滲漏量
X/F(聚四氟乙烷):0 Y(硬密封)  GB12245-1989


Material of main parts


零件名稱
零件材料
閥體、閥蓋、底蓋
WCB/304
閥座、閥盤
2Cr13/304
缸套
304/25(鍍硬鉻)
活塞
2Cr13/銅合金
活塞環
合金鑄鐵
導閥座、導閥桿
2Cr13/304
膜片
1Cr18Ni9Ti
主閥、導閥彈簧
50CrVA
調節彈簧
60Si2Mn
密封墊(X/F型號)
橡膠/聚四氟乙烷
導閥體、導閥蓋
25/304


流量系數Cv


DN
15
20
25
32
40
50
65
80
100
125
150
Cv
1
2.5
4
6.5
9
16
25
36
64
100
140


Main dimensions


公稱通徑
外形尺寸
連接尺寸
DN
L
H
H1
1.6MPa
2.5MPa
4.0MPa
6.4MPa
D
D1
Z-d
D
D1
Z-d
D
D1
Z-d
D
D1
Z-d
15
140
285
85
95
65
4-12
95
65
4-14
95
65
4-14
105
75
4-14
20
160
285
85
105
75
4-12
105
75
4-14
105
75
4-14
125
90
4-18
25
180
290
100
115
85
4-12
115
85
4-14
115
85
4-14
135
100
4-18
32
200
290
105
140
100
4-18
135
100
4-18
135
100
4-18
150
110
4-23
40
220
310
110
150
110
4-18
145
110
4-18
145
110
4-18
165
125
4-23
50
250
310
110
165
125
4-18
160
125
4-18
160
125
4-18
175
135
4-23
65
280
310
115
185
145
4-18
180
145
8-18
180
145
8-18
200
160
8-23
80
310
340
155
200
160
8-18
195
160
8-18
195
160
8-18
210
170
8-23
100
350
340
155
220
180
8-18
235
190
8-23
230
190
8-23
250
200
8-25
125
400
375
190
250
210
8-18
270
220
8-25
270
220
8-25
295
240
8-30
150
450
375
200
285
240
8-23
300
250
8-25
300
250
8-25
340
280
8-34
200
550
475
225
340
295
12-23
360
310
12-25
375
320
12-30
405
345
12-34
250
650
535
290
405
355
12-25
425
370
12-30
445
385
12-34
470
400
12-41
300
800
595
320
460
410
12-25
485
430
16-30
510
450
16-34
530
460
16-41
350
900
650
355
520
460
16-25
550
490
16-34
570
510
16-34
595
525
16-41
400
1000
700
395
580
525
16-30
610
550
16-34
655
585
16-41
670
585
16-48


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.YK43X natural gas pressure reducing valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!